Orion-system VCC-X Controller Manual do Utilizador Página 42
- Página / 96
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
VCC-X SETPOINTS
VCC-X Operator Interface SD
42
Setpoint Screen #6 - Space Sensor
Push-Button Override Duration
VCC-X Spts ID:#
Space Sensor Push
Button Override
Duration: 2.0Hr
If the VCC-X has a Space Temperature Sensor installed and it has
the Override Button option, the HVAC unit will initiate Override
Mode any time the Override Button is pressed and held for less than
3 seconds. This puts the unit into Occupied operation. The Push-
Button Override Duration Setpoint allows you to adjust the amount
of time the Override will remain in effect when the Override Button
is pressed. To cancel the Override before the Override Duration
time period expires, press the Override Button for 5 to 10 seconds.
If using a Digital Space Sensor, pushing the Override Button mo-
mentarily will initiate the Override Mode.
Description Minimum Default Maximum
Space Sensor
Push-Button
Override Duration
0.0 Hr 2.0 Hr 8.0 Hr
Setpoint Screen #7 - Controlling Sensor High
Alarm Offset
VCC-X Spts ID:#
Controlling Sensor
High Alarm Offset
Setpoint: 30.0ºF
If the Temperature of the controlling sensor rises above the Occupied
Cooling Setpoint by this amount during the Cooling Mode, the con-
troller will generate a High Control Temp Alarm. The unit must be
confi gured for Space Temperature Control, Return Air Temperature
Control, or as a Single Zone VAV unit for this alarm to be generated.
Description Minimum Default Maximum
Controlling Sensor
High Alarm Offset
0ºF
(0ºC)
30ºF
(16.6ºC)
50ºF
(27.7ºC)
VCC-X Setpoint Screens
Setpoint Screen #8 - Controlling Sensor Low
Alarm Offset
VCC-X Spts ID:#
Controlling Sensor
Low Alarm Offset
Setpoint: 30.0
If the Temperature of the controlling sensor falls below the Occupied
Heating Setpoint by this amount during the Heating Mode, the con-
troller will generate a Low Control Temp Alarm. The unit must be
confi gured for Space Temperature Control, Return Air Temperature
Control, or as a Single Zone VAV unit for this alarm to be generated.
Description Minimum Default Maximum
Controlling Sensor
Low Alarm Offset
0ºF
(0ºC)
30ºF
(16.6ºC)
50º F
(27.7ºC)
Setpoint Screen #9 - Outdoor Dewpoint
Setpoint
VCC-X Spts ID:#
Outdoor Dewpoint
Setpoint: 55.0ºF
On MUA confi gured units (100% or high percentage Outdoor Air
units), or if this is a unit in Hood On MUA operation, Dehumidifi ca-
tion will be initiated if the Outdoor Air Dewpoint rises above this
setpoint. If the humidity falls 1% below this setpoint, the unit will
leave the Dehumidifi cation Mode.
Description Minimum Default Maximum
Outdoor Dewpoint
Setpoint
35ºF
(1.7ºC)
55ºF
(12.8ºC)
80ºF
(26.6ºC)
- VCC-X Controller 1
- Operator Interface SD 1
- Technical Guide 1
- SD CARD UPDATING INSTRUCTIONS 2
- IMPORTANT NOTICE 2
- SYSTEM CONNECTION 4
- Modular Service Tool SD 4
- Modular Service Tool 5
- Modular System Manager SD 6
- Network Connection 7
- Power/Comm Board Wiring 8
- Stand Alone Connection 9
- MODULAR SERVICE TOOL SD 10
- Modular Service Tool Keys 10
- VCC-X Operator Interface SD 11
- Alarm and Override Search 13
- Schedules and Holidays 14
- MODULAR SYSTEM MANAGER SD 16
- MODULAR SYSTEM MANAGER SD 17
- Setting the Operating Mode 18
- Changing Passcodes 19
- VCC-X CONFIGURATION 24
- VCC-X CONFIGURATION 25
- VCC-X Confi guration Screens 25
- VCC-X Confi guration Screens 26
- VCC-X Setpoint Screens 39
- VCC-X SETPOINTS 40
- VCC-X SETPOINTS 41
- VCC-X STATUS 54
- VCC-X Status Screens 54
- RSMV CONFIGURATION 64
- RSMV Confi guration Screens 64
- RSMV STATUS 67
- RSMV Status Screens 67
- VAV/ZONE CONFIGURATION 69
- VAV/ZONE CONFIGURATION 70
- VAV/Zone Setpoint Screens 72
- VAV/ZONE STATUS 76
- VAV/Zone Status Screens 76
- VAV/ZONE DAMPER FORCE 78
- VAV/Zone Damper Force Modes 78
- MINILINK PD CONFIGURATION 80
- VCC-X Outputs Force 81
- TROUBLESHOOTING 82
- > to get to the Balance 83
- Save Setpoints - Network Mode 83
- SD Memory Card Update 85
- WattMaster Controllers 86
- HVAC Mode Deadband.........41 89
- VAV/Zone.........75 89
- Controlling Sensor Low Alarm 91
- VAV/Zone Confi guration 93
- VAV/Zone Status 93
- Zone Damper Position 94
Manuais e produtos relacionados com Hardware Orion-system VCC-X Controller
Hardware Orion-system VCM Manual do Utilizador
(52 páginas)
(52 páginas)
Apple CP-X255 manuales
Manuales del propietario y guías del usuario para Proyectores Apple CP-X255.
Ofrecemos 5 manuales en pdf Apple CP-X255 para descargar gratis por tipos de documentos: Manual de usuario, Información técnica, Instrucciones de operaciones
Comentários a estes Manuais