Orion-system MODGAS-X Manual do Utilizador Página 21
- Página / 28
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MODGAS-X Field Technical Guide
TROUBLESHOOTING
21
SAT Sensor Testing
Other Checks
0-3V (SAT OPTIONS Jumper Setting 1) & 0-5V
(SAT OPTIONS Jumper Setting 2) Supply Air
Temperature Sensor
If you suspect the Supply Air Temperature Sensor is not reading
correctly, make sure the wiring terminal connections are tight and
that any wiring splices are properly connected. You can check the
operation of the Supply Air Temperature Sensor by measuring the
resistance or voltage using a digital multimeter. Set the meter to DC
Volts. Place the positive probe on the AIN terminal and the negative
probe on the GND terminal. Read the DC Volts and fi nd that voltage
in Tables 5 & 6, below & page 22.
Read the temperature corresponding with that voltage and determine
if this is close to the actual temperature the sensor is exposed to. If the
temperature from the chart is different by more than a few degrees,
you probably have a defective or damaged sensor. You can also
check the sensor resistance to determine correct operation. To read
the resistance, set the meter to Ohms. Unplug the sensor connector
from the board and measure the resistance across the disconnected
wires. This resistance should match the corresponding temperature
from Tables 5 & 6, below & page 22.
Temperature to Resistance/Voltage Chart
Temp
(°F)
Temp
(°C)
Resistance
(Ohms)
Voltage @
Input (VDC)
-10 -23.3 93333 2.98
-5 -20.6 80531 2.94
0 -17.8 69822 2.89
5 -15.0 60552 2.83
10 -12.2 52500 2.77
15 -9.4 45902 2.71
20 -6.7 40147 2.64
25 -3.9 35165 2.57
30 -1.1 30805 2.49
35 1.6 27140 2.41
40 4.4 23874 2.33
45 7.2 21094 2.24
50 10.0 18655 2.15
52 11.1 17799 2.11
54 12.2 16956 2.08
56 13.3 16164 2.04
58 14.4 15385 2.00
60 15.6 14681 1.96
Temperature to Resistance/Voltage Chart
Temp
(°F)
Temp
(°C)
Resistance
(Ohms)
Voltage @
Input (VDC)
62 16.7 14014 1.93
64 17.8 13382 1.89
66 18.9 12758 1.85
68 20.0 12191 1.81
69 20.6 11906 1.79
70 21.1 11652 1.78
71 21.7 11379 1.76
72 22.2 11136 1.74
73 22.7 10878 1.72
74 23.3 10625 1.70
75 23.9 10398 1.68
76 24.4 10158 1.66
78 25.6 9711 1.63
80 27.8 9302 1.59
82 27.8 8893 1.55
84 28.9 8514 1.52
86 30.0 8153 1.48
88 31.1 7805 1.45
90 32.2 7472 1.41
95 35.0 6716 1.33
100 37.8 6047 1.24
105 40.6 5453 1.16
110 43.3 4923 1.09
115 46.1 4449 1.02
120 48.9 4030 .95
125 51.7 3656 .88
130 54.4 3317 .82
Table 5: 0-3V Temperature Sensor - Voltage &
Resistance for Type III Sensors
Table 5, continued: 0-3V Temperature Sensor -
Voltage & Resistance for Type III Sensors
Thermistor Sensor Testing Instructions
1.) Use the resistance column to check the thermistor sensor while
disconnected from the controllers (not powered).
2.) Use the voltage column to check sensors while connected to
powered controllers. Read voltage with meter set on DC volts. Place
the “-” (minus) lead on GND terminal and the “+” (plus) lead on the
sensor input terminal being investigated.
If the voltage is above 3.3 VDC, the sensor or wiring is “open.” If
the voltage is less than 0.05 VDC, the sensor or wiring is shorted.
- MODGAS-X Controller 1
- Field Technical Guide 1
- Table of Contents 2
- General Information 3
- Stand-Alone Wiring 5
- Stand-Alone Wiring, Continued 10
- MODGAS-X CONTROLLER 11
- (OE377-26-00058) 11
- WIRING 12
- Inputs and Outputs 13
- OPERATION MODES 14
- Outputs and Operation Modes 14
- Navigation Keys 15
- LCD DISPLAY SCREENS 16
- Status & Alarm Screens 17
- Setpoint & Force Screens 18
- LED Diagnostics & Alarms 19
- TROUBLESHOOTING 20
- Alarms & LED Locations 20
- SAT Sensor Testing 21
- Stand-Alone Mode 23
- Communication Mode 23
- APPENDIX A 24
- MODGAS-X 25
- APPENDIX C 26
- MAXITROL 26
- Stepper Valve Types 26
- Manual Part No. V16940 28
Manuais e produtos relacionados com Hardware Orion-system MODGAS-X
Hardware Orion-system PREHEAT-X Manual do Utilizador
(28 páginas)
(28 páginas)
Hardware Orion-system MHGRV II Manual do Utilizador
(12 páginas)
(12 páginas)
Hardware Orion-system MODGAS II Manual do Utilizador
(22 páginas)
(22 páginas)
Hardware Orion-system MHGRV III Manual do Utilizador
(20 páginas)
(20 páginas)
Hardware Orion-system HB Mini Manual do Utilizador
(24 páginas)
(24 páginas)
Apple CP-X255 manuales
Manuales del propietario y guías del usuario para Proyectores Apple CP-X255.
Ofrecemos 5 manuales en pdf Apple CP-X255 para descargar gratis por tipos de documentos: Manual de usuario, Información técnica, Instrucciones de operaciones
Comentários a estes Manuais