Orion-system GPC-XP Controller Manual do Utilizador descarregar pdf (Página 37)

GPC-XP Controller Technical Guide

Section 9: Setting Schedules

Saving, Restoring & Copying Schedules

Saving Schedules

To save the weekly time schedule, click <Save>. The File Save

Window will appear (Figure 75 below). Give the ﬁ le a name in the

“Selected File” ﬁ eld and click <Save> or press <ENTER> to save.

Figure 75: File Save Window

A message will pop up if the schedule is saved successfully. Click

<OK> to make it disappear.

Restoring Schedules

Click <Restore> to restore any previously saved schedule from a

previously saved ﬁ le. Click <Open>. A message will pop up if the

schedule is restored successfully.

Click <OK> to make it disappear.

If you try to load a schedule from one type of controller to a different

type of controller, Prism 2 will display an error message and prevent

you from making this mistake.

Copying Schedules

Click <Copy To All> to copy a schedule to other controllers. The

Copy Setpoints Window will appear (Figure 76).

Select a range to copy to in the Range Box or type unit number(s)

in the

Selected Units Box and then click <Send> to start the copy

process. When the copying is complete, the message

Copy Completed

will appear in the bottom status bar of the window.

Click <Exit> to

close the window.

Figure 76: Copy Setpoints Window

Set 24 Hour Operation

NOTE: Make sure to save any schedules you desire before

selecting this option.

To set all schedules for continuous operation, click

<Set 24 Hour

Operation>. The Schedules Window will display constant operation

for weekends and weekdays (Figure 77 below). In order to return to

the normal schedule, you will need to restore the schedule.

Figure 77: Set 24 Hour Schedule Operation

Erase Schedules

WARNING: <Erase Schedules> will clear ALL entered

stop/start times, so use with caution.

To erase all schedules, click <Erase Schedules>. The schedules

will be completely cleared. In order to return to a schedule, you will

need to restore the schedule.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Comentários a estes Manuais

Sem comentários

Orion-system GPC-XP Controller Manual do Utilizador Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Orion-system GPC-XP Controller