Orion-system E-BUS Distribution Manual do Utilizador descarregar pdf (Página 4)

E-BUS Distribution Module

Technical Guide

Environmental Requirements

The E-BUS Distribution Module needs to be installed in an environment

which can maintain a temperature range between -30°F and 150°F and

not exceed 90% relative humidity levels (non-condensing).

Mounting

The E-BUS Distribution Module is housed in a plastic enclosure. It is

designed to be mounted by using the 3 mounting holes in the enclosure

base. It is important to mount the module in a location that is free from

extreme high or low temperatures, moisture, dust, and dirt. Be careful

not to damage the electronic components when mounting the module.

See Figure 2 for Module dimensions. All dimensions are in inches.

Power Supply

The E-BUS Distribution Module requires a 24 VAC power connection

with an appropriate VA rating.

WARNING: Observe polarity! All boards must be wired

GND-to-GND and 24 VAC-to-VAC. Failure to

observe polarity could result in damage to the

boards.

Installation and Wiring

Figure 2: E-BUS Distribution Module Dimensions

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Orion-system E-BUS Distribution Manual do Utilizador Página 4